Telecommunication Monopole Antenna Tower

Monopoles

Length :From 20 to 56meter –

Matercial :ASTM A36; ASTM A572 –

deal: Hot dip galvanized Following ASTM A 123 or any other stardand by client required –

Packing: Plastic bubble , Mat &Straw Bale or following client required –

Structure: Self-supporting tubular towers, Broadcast & TV tower, microwave tower, roof top tower, watch out tower, medium wave tower –

Thickness: from 6 to 28mm –

Shape: polygonal(6 side,8 side,12 side,16 side) round tapered –

Easy install and maintenance –

baseplate ASTM A 633 GRE –

:Production process

material test → Cutting →Molding or bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating, painting →Recalibration →Thread →Packages.

 

Telecommunication Monopole Antenna Tower

Telecom Tower Monopole

: Monopole Tower is a kind of tower that consists of one stem or one pole anchored to the ground. According to its cross-section, Monopole Tower is divided in to two types

.Cilcular-pole is a kind of monopole having a cross section/panel diameter similar from bottom to top

.Tapered-pole is a kind of monopole having a varied cross-section diameter size that when the used diameter is more up will be smaller

Specification of Telecom Tower Monopole

Material	Normally   Q345B/A572, Minimum Yield Strength ≥ 345 N/mm²Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400
Suit for	Signal Transmission for Mobile Phone
Shape	Polygonal or Conical
Height	From 10 meter to 45 meter
Tolerance of the dimension	According to client’s requirement.
Surface treatment	Hot dip galvanized Following ASTM A 123, or any other standard by client required.
Joint of Poles	Slip joint, flanged connected
Standard	ISO 9001:2008
Length of per section	Within 14 meter once forming
Welding Standard	AWS (American Welding Society ) D 1.1
Thickness	1 mm to 36mm
Packages	Packing with plastic paper or according to client’s request.