09171072507
Four Legged Angular Telecommunication Tower

Four Legged Angular Telecommunication Tower

Four Legged Angular Telecommunication Tower

Four Legged Angular Telecommunication Tower

Tubular tower appeared year 2001 in China. The main pier is made from tubular, auxiliary part made from pipe and angel steel.
The advantage of tubular tower:
1. Reduce the weight by 10%–20%
2. Reduce the wind press of the tower
3. Larger 20% rotation radius than angel tower.
4. Larger load capacity than angel tower.
5. Reduce 10%–20% material
6. Shorten preiod install
7. Structure diversification

The shortage:1. More complex structure connection2. Slower efficiency in production

Height From 10M-100M or according to client’s requirement
Material Normally Q235B/A36,Yeild Strength≥235MPa
Q345B/A572,Yeild Strength≥345MPa
As well as Hot Rolled coil from ASTM572, GR65,GR50,SS400
Tolerance of the dimension According to client’s requirement
Surface treatment Hot-dip-galvanized following ASTM123, or any other standard by client’s requirement
Joint of Poles Slip joint, flanged connected
Standard ISO9001:2008
Welding Standard AWS(American Welding Society)D 1.1
Production Process Raw material test-cutting-bending-welding-dimension verify-flange welding-hole drilling-sample assemble-surface clean-galvanization or power coating /painting-recalibration-packages

Four Legged Angular Telecommunication Tower

parstower

Ground Telecommunication Tower

Ground Telecommunication Tower

Ground Telecommunication Tower

Ground Telecommunication Tower

:Material Test

All of our material are purchased from famous mill factory to assure the quality –
A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory; otherwise we have our reason to refuse the material –
Before put into production, all the material must pass the chemical and physical analysis to make sure that they have met the requested strength and component –

Ground Telecommunication Tower

 

Material Q345 Q235 steel
Surface treatment Hot dip galvanized
Height 30-120m,  also can customized as buyer’s requirements
Wind speed 30-50m/s,also can customized as buyer’s requirements
Connection type Flange
Service life Usually up to 50 years
Application Park, farm, seaside, factory, etc
Standard GB / ANSI / TIA-222-G
Certification ISO9001 / SGS / CE

parstower

4 Legged Angular Telecommunication Tower

4 Legged Angular Telecommunication Tower

4 Legged Angular Telecommunication Tower

[column size=”1-2″ last=”0″]

4 Legged Angular Telecommunication Tower

[/column]

[column size=”1-2″ last=”1″]

Tubular tower appeared year 2001 in China. The main pier is made from tubular, auxiliary part made from pipe and angel steel.
The advantage of tubular tower:
1. Reduce the weight by 10%–20%
2. Reduce the wind press of the tower
3. Larger 20% rotation radius than angel tower.
4. Larger load capacity than angel tower.
5. Reduce 10%–20% material
6. Shorten preiod install
7. Structure diversification

The shortage:
1. More complex structure connection
2. Slower efficiency in production

[/column]

Height From 10M-100M or according to client’s requirement
Material Normally Q235B/A36,Yeild Strength≥235MPa
Q345B/A572,Yeild Strength≥345MPa
As well as Hot Rolled coil from ASTM572, GR65,GR50,SS400
Tolerance of the dimension According to client’s requirement
Surface treatment Hot-dip-galvanized following ASTM123, or any other standard by client’s requirement
Joint of Poles Slip joint, flanged connected
Standard ISO9001:2008
Welding Standard AWS(American Welding Society)D 1.1
Production Process Raw material test-cutting-bending-welding-dimension verify-flange welding-hole drilling-sample assemble-surface clean-galvanization or power coating /painting-recalibration-packages

4 Legged Angular Telecommunication Tower